Home/ Questions/Q 4598508
In Process

The Archive Base Latest Questions

Editorial Team
  • 0
Asked: 2026-05-21T23:24:33+00:00

I am trying to build a DBPSK demodulator using Simulink and Xilinx blockset. I

  • 0

I am trying to build a DBPSK demodulator using Simulink and Xilinx blockset. I calculate the Phase Difference of the Successive samples like this :
enter image description here

So, now I need to map these Phase Difference to Symbol 0 or 1 depending on whether the Phase difference is 0 or pi.

% ----------------------------------------
% | Bit input   |   Phase change (+j*pi) |
% ----------------------------------------
% |     0       |       0                |
% ----------------------------------------
% |     1       |       pi               |
% ----------------------------------------

I am not sure how I can do Phase to Symbol mapping in Simulink(Xilinx). BTW, here is the Matlab version :

demod_symbol=abs(round(DBPSK_Signal/pi));
for i=1:length(demod_symbol)
        if(demod_symbol(i)==2)
            demod_symbol(i)=0;
        end
end

Please let me know, if my approach is correct and how to proceed further

Share

Leave an answer

You must login to add an answer.

Need An Account,

1 Answer

  1. Editorial Team

    Take the output of your subtractor and feed it to a “greater-than” compare block with the other input set to pi/2. The output of that will be the bit you need.

    Be aware, you’ll be creating quite a lot of logic in those atan blocks – there’s almost definitely a more efficient way of doing this, but it doesn’t spring to mind right at this minute.

    • 0