I am trying to get a linux kernel with a linux rootfs running on an imx51 Freescale board.
I compiled linux kernel, root file system and u-boot and copied the image to SD-card: partition 0: boot partition 1: rootfs and linux kernel
However I have the following error:
U-Boot 2011.12 (Mar 13 2012 - 14:15:41)
CPU: Freescale i.MX51 family rev3.0 at 800 MHz
Reset cause: POR
Board: MX51EVK
DRAM: 512 MiB
WARNING: Caches not enabled
MMC: FSL_SDHC: 0, FSL_SDHC: 1
MMC: no card present
MMC init failed
Using default environment
In: serial
Out: serial
Err: serial
Net: FEC
Warning: failed to set MAC address
Hit any key to stop autoboot: 0
MX51EVK U-Boot > mmcinfo
MMC: no card present
Device: FSL_SDHC
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0 Bytes
Bus Width: 0-bit
MX51EVK U-Boot > mmc init
mmc - MMC sub system
Usage:
mmc read addr blk# cnt
mmc write addr blk# cnt
mmc erase blk# cnt
mmc rescan
mmc part - lists available partition on current mmc device
mmc dev [dev] [part] - show or set current mmc device [partition]
mmc list - lists available devices
MX51EVK U-Boot > mmc list
FSL_SDHC: 0
FSL_SDHC: 1
MX51EVK U-Boot > mmc dev
MMC: no card present
mmc0(part 0) is current device
MX51EVK U-Boot >
What could be wrong?
Checking the DIP switches, I realized that the switch was set to boot the SDcard from the bottom slot while I had all along booted from top slot. Thus, it solved my problem