Home/ Questions/Q 934977
In Process

The Archive Base Latest Questions

Editorial Team
  • 0
Asked: 2026-05-15T21:05:10+00:00

I am using SharpPCap which is built on WinPCap to capture UDP traffic. My

  • 0

I am using SharpPCap which is built on WinPCap to capture UDP traffic. My end goal is to capture the audio data from H.323 and save those phone conversations as WAV files. But first thing is first – I need to figure out what my UDP packets are crossing the NIC.

SharpPCap provides a UdpPacket class that gives me access to the PayloadData of the message. But I am unsure what do with this data. It’s a Byte[] array and I don’t know how to go about determining if it’s an RTP or RTCP packet.

I’ve Googled this topic but there isn’t much out there. Any help is appreciated.

Share

Leave an answer

You must login to add an answer.

Need An Account,

1 Answer

  1. Editorial Team

    Look at the definitions for RTP and RTCP packets in RFC 3550:

     0                   1                   2                   3
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|V=2|P|X|  CC   |M|     PT      |       sequence number         |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|                           timestamp                           |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|           synchronization source (SSRC) identifier            |
+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+
|            contributing source (CSRC) identifiers             |
|                             ....                              |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

    I won’t reproduce the legend for all of the above – it’s quite long – but take a look at Section 5.1.

    With that in hand you’ll see there’s not a lot you can do to determine if a packet contains RTP/RTCP. Best of all would be to sniff, as other posters have suggested, the media stream negotiation. Second best would be some sort’ve pattern matching over a sequence of packets: the first two bits will be 10, followed by the next two bits being constant, followed by bits 9 through 15 being constant, then 16 -> 31 incrementing, and so on.

    • 0