Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people’s questions & connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
I want to send / receive sms using AT commands from my computer to my mobile phone. I connected my phone to my computer using a USB port. My computer detects the modem and I am able to send sms from the computer to mobile phone. However, I am not able to receive sms in my computer..
I am presenting a sample of what I get from AT editor
AT+CMGF=1
OK
AT+CNMI=1,2,0,0,0
Error
What can I do to send this prob and why am I getting this Error?
Every phone has different capabilities so you should check which values for each parameter are valid for your phone by sending it a
For example my phone doesn’t support your example because mode 1 is not supported. For the full syntax of +CNMI you can consult the AT Manual of your manufacturer or the ETSI standard or read this brief tutorial http://www.cellular.co.za/at_etsi.htm
AT+CNMI is used anyway just to get a notification when a SMS arrives, in order to read the content of the stored SMS you have to use AT+CMGL= or AT+CMGR=.
Briefly:
AT+CMGF=1 ;sets the text mode
AT+CMGL=? ;tells you which memories are available
AT+CSCS=? ;tells you which character sets are available
AT+CSCS=”8859-1″ ;sets Latin1 as the charset so that you can see eventually accented letters
AT+CMGL=”ALL” ;prints every text message you have stored in your phone