If I had a RFID reader that sends a bunch of keystrokes through USB like a HID, how would the COM port interperate that if I used a USB to COM converter? What would the COM port see?
Share
Sign Up to our social questions and Answers Engine to ask questions, answer people’s questions, and connect with other people.
Login to our social questions & Answers Engine to ask questions answer people’s questions & connect with other people.
Lost your password? Please enter your email address. You will receive a link and will create a new password via email.
Please briefly explain why you feel this question should be reported.
Please briefly explain why you feel this answer should be reported.
Please briefly explain why you feel this user should be reported.
If I had a RFID reader that sends a bunch of keystrokes through USB like a HID, how would the COM port interperate that if I used a USB to COM converter? What would the COM port see?
You should see the “keystrokes” from the rfid device.
At the link level, the converter should take care of speed mismatch issues. It does this via an internal buffer or by throttling the sender.
But the HID protocol is more than simple keystrokes. So either the additional information will be suppressed by the USB-COM converter or it won’t be. This issue may also be converter-dependent.
In this sort of HW mashup, the best thing is to try it and see. (And then write a blog post about what you discovered.)
What is your overall goal? What sw are you trying to connect the RFID reader to?
Added I agree with @Turbo J’s point: most every USB-COM converter acts as a USB device. As such, if you connect them to another USB device, nothing will happen since you’re using them “the wrong way around.”
You’ll need to find a USB/Host to COM converter. The usual name for such things is “computer” — a used laptop may be your best bet if you want to continue down this road.