I’m currently learning C for my next emulation project, a cycle accurate 68000 core (my last project being a non-cycle accurate Sega Master System emulator written in Java which is now on its third release). My query regards cycle level accuracy as taking things to this level is a new thing for me.
To break things down to a granularity of 1 CPU cycle, presumably I need to know how long memory accesses take and so on, but my question is that for instructions that take multiple cycles in their memory fetch/write stages, what is the CPU doing each cycle – e.g. are x amount of bits copied per cycle.
With my SMS emulator I didn’t have to worry too much about M1 stages etc, as it just used a cycle count for each instruction – in other words it is only accurate to an instruction level, not a cycle level. I’m not looking for architecture specific details, merely an idea of what sort of things I should look out for when going to this level of granularity.
68k details are welcome however. Basically I’m wondering what is supposed to happen if a video chip reads from an area of memory whilst a CPU is still writing the data to it mid way through that phase of an instruction, and other similar situations. I hope I’ve made it clear enough, thank you.
For a really cycle accurate emulation you have first to decide on a master clock you want to use as reference. That should be the fastest clock at which’s granularity the software running can detect differences in order of occurance. This could by the CPU clock, but in most cases the bus cycle time decides at which granularity events can be discerned (and that is often only a fraction of the CPU clock).
Then you need to find out the precendence order the different devices (IC’s) connected to that bus have (if there is more than one bus master). An example would be if (and how) video DMA can delay the CPU.
There exist generally no at the same time events. Either the CPU writes before the DMA reads, or the other way around (that is still true in case of dual ported devices, you just need to consider the device’s inherent predence mechanism).
Once you have a solid understanding which clock is the effectively controlling the granularity of discernible events you can think about how to structure the emulator to reproduce that behaviour exactly.
This way you can create a 100% cycle exact emulation, given you have enough information about all the devices behavior.
Sorry I can’t give you more detailed info, I know nothing about the specifics of the Sega’s hardware.