Question

I’m running into a problem with the MNP package which I’ve traced to an unfortunate call to deparse (whose maximum width is limited to 500 characters).

Background (easily skippable if you’re bored)

Because mnp uses a somewhat idiosyncratic syntax to allow for varying choice sets (you include cbind(choiceA,choiceB,...) in the formula definition), the left hand side of my formula call is 1700 characters or so when model.matrix.default calls deparse on it. Since deparse supports a maximum width.cutoff of 500 characters, the sapply(attr(t, "variables"), deparse, width.cutoff = 500)[-1L] line in model.matrix.default has as its first element:

[1] "cbind(plan1, plan2, plan3, plan4, plan5, plan6, plan7, plan8, plan9, plan10, plan11, plan12, plan13, plan14, plan15, plan16, plan17, plan18, plan19, plan20, plan21, plan22, plan23, plan24, plan25, plan26, plan27, plan28, plan29, plan30, plan31, plan32, plan33, plan34, plan35, plan36, plan37, plan38, plan39, plan40, plan41, plan42, plan43, plan44, plan45, plan46, plan47, plan48, plan49, plan50, plan51, plan52, plan53, plan54, plan55, plan56, plan57, plan58, plan59, plan60, plan61, plan62, plan63, "       
[2] "    plan64, plan65, plan66, plan67, plan68, plan69, plan70, plan71, plan72, plan73, plan74, plan75, plan76, plan77, plan78, plan79, plan80, plan81, plan82, plan83, plan84, plan85, plan86, plan87, plan88, plan89, plan90, plan91, plan92, plan93, plan94, plan95, plan96, plan97, plan98, plan99, plan100, plan101, plan102, plan103, plan104, plan105, plan106, plan107, plan108, plan109, plan110, plan111, plan112, plan113, plan114, plan115, plan116, plan117, plan118, plan119, plan120, plan121, plan122, plan123, "
[3] "    plan124, plan125, plan126, plan127, plan128, plan129, plan130, plan131, plan132, plan133, plan134, plan135, plan136, plan137, plan138, plan139, plan140, plan141, plan142, plan143, plan144, plan145, plan146, plan147, plan148, plan149, plan150, plan151, plan152, plan153, plan154, plan155, plan156, plan157, plan158, plan159, plan160, plan161, plan162, plan163, plan164, plan165, plan166, plan167, plan168, plan169, plan170, plan171, plan172, plan173, plan174, plan175, plan176, plan177, plan178, plan179, "
[4] "    plan180, plan181, plan182, plan183, plan184, plan185, plan186, plan187, plan188, plan189, plan190, plan191, plan192, plan193, plan194, plan195, plan196, plan197, plan198, plan199, plan200, plan201, plan202, plan203, plan204, plan205, plan206, plan207, plan208, plan209, plan210, plan211, plan212, plan213, plan214, plan215, plan216, plan217, plan218, plan219, plan220, plan221, plan222, plan223, plan224, plan225, plan226, plan227, plan228, plan229, plan230, plan231, plan232, plan233, plan234, plan235, "
[5] "    plan236, plan237, plan238, plan239, plan240, plan241, plan242, plan243, plan244, plan245, plan246, plan247, plan248, plan249, plan250, plan251, plan252, plan253, plan254, plan255, plan256, plan257, plan258, plan259, plan260, plan261, plan262, plan263, plan264, plan265, plan266, plan267, plan268, plan269, plan270, plan271, plan272, plan273, plan274, plan275, plan276, plan277, plan278, plan279, plan280, plan281, plan282, plan283, plan284, plan285, plan286, plan287, plan288, plan289, plan290, plan291, "
[6] "    plan292, plan293, plan294, plan295, plan296, plan297, plan298, plan299, plan300, plan301, plan302, plan303, plan304, plan305, plan306, plan307, plan308, plan309, plan310, plan311, plan312, plan313)"  

When model.matrix.default tests this against the variables in the data.frame, it returns an error.

The problem

To get around this, I’ve written a new deparse function:

deparse <- function (expr, width.cutoff = 60L, backtick = mode(expr) %in% 
  c("call", "expression", "(", "function"), control = c("keepInteger", 
                                                        "showAttributes", "keepNA"), nlines = -1L)  {
    ret <- .Internal(deparse(expr, width.cutoff, backtick, .deparseOpts(control), nlines))
    paste0(ret,collapse="")
  }

However, when I run mnp again and step through, it returns the same error for the same reason (base::deparse is being run, not my deparse).

This is somewhat surprising to me, as what I expect is more typified by this example, where the user-defined function temporarily over-writes the base function:

> print <- function() {
+   cat("user-defined print ran\n")
+ }
> print()
user-defined print ran

I realize the right way to solve this problem is to rewrite model.matrix.default, but as a tool for debugging I’m curious how to force it to use my deparse and why the anticipated (by me) behavior is not happening here.

Answer 1

The functions fixInNamespace and assignInNamespace are provided to allow editing of existing functions. You could try … but I will not since mucking with deparse looks too dangerous:

 assignInNamespace("deparse", 
                  function (expr, width.cutoff = 60L, backtick = mode(expr) %in% 
               c("call", "expression", "(", "function"), control = c("keepInteger", 
               "showAttributes", "keepNA"), nlines = -1L)  {
    ret <- .Internal(deparse(expr, width.cutoff, backtick, .deparseOpts(control), nlines))
    paste0(ret,collapse="")
                         }   , "base")

There is an indication on the help page that the use of such functions has restrictions and I would not be surprised that such core function might have additional layers of protection. Since it works via side-effect, you should not need to assign the result.