Question

I’m studied the pARK example project (http://developer.apple.com/library/IOS/#samplecode/pARk/Introduction/Intro.html#//apple_ref/doc/uid/DTS40011083) so I can apply some of its fundamentals in an app i’m working on. I understand nearly everything, except:

• The way it has to calculate if a point of interest must appear or not. It gets the attitude, multiply it with the projection matrix (to get the rotation in GL coords?), then multiply that matrix with the coordinates of the point of interest and, at last, look at the last coordinate of that vector to find out if the point of interest must be shown. Which are the mathematic fundamentals of this?

Thanks a lot!!

Answer 1

I assume you are referring to the following method:

- (void)drawRect:(CGRect)rect
{
     if (placesOfInterestCoordinates == nil) {
         return;
     }

    mat4f_t projectionCameraTransform;
    multiplyMatrixAndMatrix(projectionCameraTransform, projectionTransform, cameraTransform);

    int i = 0;
    for (PlaceOfInterest *poi in [placesOfInterest objectEnumerator]) {
        vec4f_t v;
        multiplyMatrixAndVector(v, projectionCameraTransform, placesOfInterestCoordinates[i]);

        float x = (v[0] / v[3] + 1.0f) * 0.5f;
        float y = (v[1] / v[3] + 1.0f) * 0.5f;
        if (v[2] < 0.0f) {
            poi.view.center = CGPointMake(x*self.bounds.size.width, self.bounds.size.height-y*self.bounds.size.height);
            poi.view.hidden = NO;
        } else {
            poi.view.hidden = YES;
        }
        i++;
    }
}

This is performing an OpenGL like vertex transformation on the places of interest to check if they are in a viewable frustum. The frustum is created in the following line:

createProjectionMatrix(projectionTransform, 60.0f*DEGREES_TO_RADIANS, self.bounds.size.width*1.0f / self.bounds.size.height, 0.25f, 1000.0f);

This sets up a frustum with a 60 degree field of view, a near clipping plane of 0.25 and a far clipping plane of 1000. Any point of interest that is further away than 1000 units will then not be visible.

So, to step through the code, first the projection matrix that sets up the frustum, and the camera view matrix, which simply rotates the object so it is the right way up relative to the camera, are multiplied together. Then, for each place of interest, its location is multiplied by the viewProjection matrix. This will project the location of the place of interest into the view frustum, applying rotation and perspective.

The next two lines then convert the transformed location of the place into whats known as normalized device coordinates. The 4 component vector needs to be collapsed to 3 dimensional space, this is achieved by projecting it onto the plane w == 1, by dividing the vector by its w component, v[3]. It is then possible to determine if the point lies within the projection frustum by checking if its coordinates lie in the cube with side length 2 with origin [0, 0, 0]. In this case, the x and y coordinates are being biased from the range [-1 1] to [0 1] to match up with the UIKit coordinate system, by adding 1 and dividing by 2.

Next, the v[2] component, z, is checked to see if it is greater than 0. This is actually incorrect as it has not been biased, it should be checked to see if it is greater than -1. This will detect if the place of interest is in the first half of the projection frustum, if it is then the object is deemed visible and displayed.

If you are unfamiliar with vertex projection and coordinate systems, this is a huge topic with a fairly steep learning curve. There is however a lot of material online covering it, here are a couple of links to get you started:

http://www.falloutsoftware.com/tutorials/gl/gl0.htm

http://www.opengl.org/wiki/Vertex_Transformation

Good luck//