I’m trying to send message using tibrvsend command.
The scenarios is like below ,
I’ve server running on network , I’m able to ping the server Ip address and able to connect using remote desktop connection.
On the server i’m listening to the subject
tibrvlisten -service 7541 -network ;239.193.1.110 MY.SUBJECT
From my local machine I’m trying to send message to the same subject above, but it is not reaching to the server. If i use the same send command on the server it is working fine and message is reaching . I’m not able send the same from my local to server.
tibrvsend -service 7541 -network 184.10.34.9;239.193.1.110 -daemon tcp:7541 MY.SUBJECT "Hello Test Message"
The error i’m getting on console is tibrvsend: Failed to initialize transport: Could not resolve network specification
Try to keep the network parameter as simple as possible, and only use the daemon parameter if you are running multiple daemons or using a remote daemon.
On Windows you often have multiple network adapters which is why you sometimes need to be more specific with the first parameter. The interface address is usually the easiest form to use as you have discovered.
On Unix platforms you can use the interface name or network name from
/etc/networksbut you do not have this luxury on Windows, and often IPv6 renders it unusable.Read the RV Concepts Guide for more discussion on the network parameter.
The most useful being network IP, e.g. 1.2.3. will match interface 1.2.3.4