Home/ Questions/Q 41295
In Process

The Archive Base Latest Questions

Editorial Team
  • 0
Asked: 2026-05-10T15:09:30+00:00

I’m trying to use libvirt with virsh to manage my kvm/qemu vms. The problem

  • 0

I’m trying to use libvirt with virsh to manage my kvm/qemu vms. The problem I have is with getting it to work with public IPs. The server is running ubuntu 8.04.

libvirt keeps trying to run it as:

/usr/bin/kvm -M pc -m 256 -smp 3 -monitor pty -no-acpi \    -drive file=/opt/virtual-machines/calculon/root.qcow2,if=ide,boot=on \    -net nic,vlan=0,model=virtio -net tap,fd=10,vlan=0 -usb -vnc 127.0.0.1:0

Which boots, but does not have any network access (pings go nowhere). Running it without fd=10 makes it work right, with kvm creating the necessary TAP device for me and networking functioning inside the host. All the setup guides I’ve seen focus on setting up masquerading, while I just want a simple bridge and unfiltered access to the net (both the guests and host must use public IPs).

Running ifconfig on the host gives this, the bridge is manually setup in my /etc/network/interfaces file. :

br0   Link encap:Ethernet  HWaddr 00:1e:c9:3c:59:b8       inet addr:12.34.56.78  Bcast:12.34.56.79  Mask:255.255.255.240       inet6 addr: fe80::21e:c9ff:fe3c:59b8/64 Scope:Link       UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1       RX packets:3359 errors:0 dropped:0 overruns:0 frame:0       TX packets:3025 errors:0 dropped:0 overruns:0 carrier:0       collisions:0 txqueuelen:0       RX bytes:180646 (176.4 KB)  TX bytes:230908 (225.4 KB)  eth0  Link encap:Ethernet  HWaddr 00:1e:c9:3c:59:b8       inet6 addr: fe80::21e:c9ff:fe3c:59b8/64 Scope:Link       UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1       RX packets:6088386 errors:0 dropped:0 overruns:0 frame:0       TX packets:3058 errors:0 dropped:0 overruns:0 carrier:0       collisions:0 txqueuelen:1000       RX bytes:680236624 (648.7 MB)  TX bytes:261696 (255.5 KB)       Interrupt:33

Any help would be greatly appreciated.

Share

Leave an answer

You must login to add an answer.

Need An Account,

1 Answer

  1. I followed the bridged networking guide at https://help.ubuntu.com/community/KVM and have the following in /etc/network/interfaces:

    auto eth0 iface eth0 inet manual  auto br0 iface br0 inet static         address 192.168.0.10         network 192.168.0.0         netmask 255.255.255.0         broadcast 192.168.0.255         gateway 192.168.0.1         bridge_ports eth0         bridge_fd 9         bridge_hello 2         bridge_maxage 12         bridge_stp off

    I have not changed any libvirt network settings and my kvm images are booted like:

    /usr/bin/kvm -M pc -no-kqemu -m 256 -smp 1 -monitor pty -boot c -hda \     /libvirt/apt.img -net nic,macaddr=00:16:3e:77:32:1d,vlan=0 -net \     tap,fd=11,script=,vlan=0 -usb -vnc 127.0.0.1:0

    I then specify the static network settings in the kvm image as normal. Has all worked ok since I followed the guide.

    I do have the following settings in my xml files in /etc/libvirt/qemu/ though under devices:

    <interface type='bridge'>   <mac address='00:16:3e:77:32:1d'/>   <source bridge='br0'/> </interface>
    • 0