Suppose, there is a network which gives a lot of Timeout errors when packets are transmitted over it. Now, timeouts can happen either because the network itself is inherently lossy (say, poor hardware) or it might be that the network is highly congested, due to which network devices are losing packets in between, leading to Timeouts. Now, what additional statistics about the traffic being transmitted (like Missing Packets errors etc.) are required that might help us to find out whether timeouts are happening due to poor hardware, or too much network load.
Please note that we have access only to one node in the network (from which we are transmitting packets) and as such, we cannot get to know the load being put by other nodes on the network. Similarly, we don’t really have any information about the hardware being used in the network. Statistics is all that we have.
Suppose, there is a network which gives a lot of Timeout errors when packets
Share
A network node only has hardware information about its local collision domain, which on a standard network will be the cable that links the host to the switch.
All the TCP stack will know about lost packets is that it is not receiving acknowledgements so it needs to resend, there is no mechanism for devices (E.g. switches & routers) between a source and destination to tell the source that there is a problem.
Without access to any other nodes the only way to ascertain if your problem is load based would be to run a test that sends consistent traffic over the network for a long period, if the packet retry count per second/minute/hour remains the same then it would suggest that there is a hardware issue, if the losses only occur during peak traffic periods then the issue could be load related. Of course there could be a situation where misconfigured hardware issues will only be apparent during high traffic periods, this takes things back to the main problem which is that you need access to network stats from beyond your single node.