Home/ Questions/Q 3721328
In Process

The Archive Base Latest Questions

Editorial Team
  • 0
Asked: 2026-05-19T05:31:07+00:00

this is my first post, and it covers something which I’ve been trying to

  • 0

this is my first post, and it covers something which I’ve been trying to get working on and off for about a year now.

Essentially it boils down to the following: I have a copy of newlib which I’m trying to get working on an LPC2388 (an ARM7TDMI from NXP). This is on a linux box using arm-elf-gcc

The question I have is that I’ve been looking at a lot of the tutorials talking about porting newlib, and they all talk about the stubs (like exit, open, read/write, sbrk), and I have a pretty good idea of how to implement all of these functions. But where should I put them?

I have the newlib distribution from sources.redhat.com/pub/newlib/newlib-1.18.0.tar.gz and after poking around I found “syscalls.c” (in newlib-1.18.0/newlib/libc/sys/arm) which contains all of the stubs which I have to update, but they’re all filled in with rather finished looking code (which does NOT seem to work without the crt0.S, which itself does not work with my chip).

Should I just be wiping out those functions myself, and re-writing them? Or should I write them somewhere else. Should I make a whole new folder in newlib/libc/sys with the name of my “architecture” and change the target to match?

I’m also curious if there’s proper etiquette on distribution of something like this after releasing it as an open source project. I currently have a script which downloads binutils, arm-elf-gcc, newlib, and gdb, and compiles them. If I am modifying files which are in the newlib directory, should I hand a patch which my script auto-applies? Or should I add the modified newlib to the repository?

Thanks for bothering to read! Following this is a more detailed breakdown of what I’m doing.

For those who want/need more info about my setup:

I’m building a ARM videogame console based loosely on the Uzebox project ( http://belogic.com/uzebox/ ).

I’ve been doing all sorts of things pulling from a lot of different resources as I try and figure it out. You can read about the start of my adventures here (sparkfun forums, no one responds as I figure it out on my own): forum.sparkfun.com/viewtopic.php?f=11&t=22072

I followed all of this by reading through the Stackoverflow questions about porting newlib and saw a few of the different tutorials (like wiki.osdev.org/Porting_Newlib ) but they also suffer from telling me to implements stubs without mentioning where, who, what, when, or how!

Share

Leave an answer

You must login to add an answer.

Need An Account,

1 Answer

  1. Editorial Team

    But where should I put them?

    You can put them where you like, so long as they exist in the final link. You might incorporate them in the libc library itself, or you might keep that generic, and have the syscalls as a separate target specific object file or library.

    You may need to create your own target specific crt0.s and assemble and link it for your target.

    A good tutorial by Miro Samek of Quantum Leaps on getting GNU/ARM development up and running is available here. The examples are based on an Atmel AT91 part so you will need to know a little about your NXP device to adapt the start-up code.

    A ready made Newlib porting layer for LPC2xxx was available here, but the links ot teh files appear to be broken. The same porting layer is used in Martin Thomas’ WinARM project. This is a Windows port of GNU ARM GCC, but the examples included in it are target specific not host specific.

    You should only need to modify the porting layer on Newlib, and since it is target and application specific, you need not (in fact probably should not) submit your code to the project.

    • 0