Question

I am building a custom initramfs image that I am building as a CPIO archive into the Linux kernel (3.2).

The issue I am having is that no matter what I try, the kernel does not appear to even attempt to run from the initramfs.

The files I have in my CPIO archive:

cpio -it < initramfs.cpio
.
init
usr
usr/sbin
lib
lib/libcrypt.so.1
lib/libm.so
lib/libc.so.6
lib/libgcc_s.so
lib/libcrypt-2.12.2.so
lib/libgcc_s.so.1
lib/libm-2.12.2.so
lib/libc.so
lib/libc-2.12.2.so
lib/ld-linux.so.3
lib/ld-2.12.2.so
lib/libm.so.6
proc
sbin
mnt
mnt/root
root
etc
bin
bin/sh
bin/mknod
bin/mount
bin/busybox
sys
dev
4468 blocks

Init is very simple, and should just init devices and spawn a shell (for now):

#!/bin/sh

mount -t devtmpfs none /dev
mount -t proc none /proc
mount -t sysfs none /sys
/bin/busybox --install -s
exec /bin/sh

In the kernel .config I have:

CONFIG_INITRAMFS_SOURCE="../initramfs.cpio"
CONFIG_INITRAMFS_ROOT_UID=0
CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_BLK_DEV_INITRD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=1
CONFIG_BLK_DEV_RAM_SIZE=32768

Kernel builds and the uImage size is larger depending on the initramfs size, so I know the image is being packed. However I get this output when I boot:

console [netcon0] enabled
netconsole: network logging started
omap_rtc omap_rtc: setting system clock to 2000-01-02 00:48:38 UTC (946774118)
Warning: unable to open an initial console.
Freeing init memory: 1252K
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new high speed SDHC card at address e624
mmcblk0: mmc0:e624 SU08G 7.40 GiB
 mmcblk0: p1
Kernel panic - not syncing: Attempted to kill init!
[<c000d518>] (unwind_backtrace+0x0/0xe0) from [<c0315cf8>] (panic+0x58/0x188)
[<c0315cf8>] (panic+0x58/0x188) from [<c0021520>] (do_exit+0x98/0x6c0)
[<c0021520>] (do_exit+0x98/0x6c0) from [<c0021e88>] (do_group_exit+0xb0/0xdc)
[<c0021e88>] (do_group_exit+0xb0/0xdc) from [<c0021ec4>] (sys_exit_group+0x10/0x18)
[<c0021ec4>] (sys_exit_group+0x10/0x18) from [<c00093a0>] (ret_fast_syscall+0x0/0x2c)

From that output, it does not look like it is even trying to extract the CPIO archive as initramfs. I expect to see this printk output, which is present in linux code init/initramfs.c:

printk(KERN_INFO "Trying to unpack rootfs image as initramfs...\n");

I tried the filesystem once booting is complete (using chroot) and it works fine… so I believe the filesystem/libraries are sane.

Could anyone give me some pointers as to what I may have incorrect? Thanks in advance for any assistance!

Answer 1

I figured it out. I will post the answer in case anyone else has this issue.

I was missing a console device, this line was the clue:

Warning: unable to open an initial console.

After adding printk’s so that I better understood the startup sequence, I realized that console device is opened prior to running the init script. Therefore, the console device must be in the initramfs filesystem directly, and we cannot rely on the devtmpfs mount to create that.

I think when the init script ran the shell was trying to open the console and failed, that’s why the kernel was outputting:

Kernel panic - not syncing: Attempted to kill init!

Executing the folowing commands from within the /dev directory of initramfs on the kernel build machine will generate the required device nodes:

mknod -m 622 console c 5 1
mknod -m 622 tty0 c 4 0

After re-CPIO archiving the filesystem and rebuilding the kernel, I finally have a working filesystem in initramfs that the kernel will boot.